Product GuideChoosing the Right High Mast Pole: Height, Material, and Ring Type
A high mast pole is a structural product, not a fixed catalogue item — the right specification depends on the area you need to light, the wind zone, and how the fixtures will be serviced. Here's what actually drives the specification.
Choosing Pole Height
Pole height is set by the area of coverage and the lux level required, not by a standard default. As a general guide: 9–12m poles suit street and parking-area lighting, 16–20m poles cover fuel stations and toll plazas, 25–30m poles are typical for highway junctions and industrial yards, and 30–40m poles are used for ports, stadiums, and large open yards where a few tall poles cover more ground than many short ones with less glare.
Material and Galvanization
Our poles are fabricated from hot-dip galvanized MS steel (octagonal or conical section) per IS 2713, with the galvanizing thickness per IS 4759 selected based on the environment — coastal and industrial-atmosphere sites need a thicker coating than inland sites to resist corrosion over the pole's design life.
Fixed Ring vs. Lowering Ring
A fixed-ring pole is simpler and lower-cost but requires a truck-mounted platform or crane every time a lamp needs replacing. A lowering-ring pole (manual winch or motorized) lets the luminaire ring be lowered to ground level for maintenance — this is almost always the better choice for taller poles (20m+) or sites without easy crane access, since it eliminates the cost of arranging lifting equipment for routine lamp changes.
Wind Rating
Every pole is designed against IS 875 wind load calculations for its intended location. Poles for cyclone-prone coastal belts (Gujarat, Tamil Nadu, Odisha, West Bengal coast) are engineered for higher wind speeds — up to 200 km/hr — than poles for inland, lower wind-zone states.
Frequently Asked Questions
What is the price of a high mast pole per meter in India?
Price per meter varies with pole height, steel section, galvanizing thickness, and ring type — a 40m port-grade pole with a motorized lowering ring costs meaningfully more per meter than a 12m fixed-ring pole. Share your height and site details and we'll provide an itemised quote.
What height of pole do I need for a factory yard of about 1 acre?
This depends on the layout and required lux level, but as a general reference, 20–25m poles with 4–6 luminaires per pole are common for industrial yards of that size. We do a free lux-level simulation before recommending a final height and quantity.
Can poles be customized for non-standard heights?
Yes, poles are fabricated to the height your project requires; 9m, 12m, 16m, 20m, 25m, 30m, 35m, and 40m are our standard range, with intermediate heights available on request.
Do you supply poles only, or supply and install?
Both — we can supply poles for a project you're installing yourself, or handle the complete turnkey scope including foundation and erection.
